一体式测距系统 AMSD 4B
读数头更换简便 = 安装简便，同时确保高质量和高精度
为一体式测距系统开发的 标准型线性导轨适合多种应用、成本经济合算，同时满足最高的质量要求。
MONORAIL AMSD 4B是一款一体式磁栅测量系统，它适用于MONORAIL BM滚珠直线导轨，带有一个增量式数字接口，产品原型是AMSA 4A。相同的导轨可以兼容使用AMSA 4B和AMSD 4B。 AMSD 4B带有一个增量式数字接口和一系列读数头选项，兼容不同的分辨率以及不同输入频率的控制系统。
Frequently Asked Questions about the AMSD System from SCHNEEBERGER
Is a calibration required after installing an AMSD system?
After installing an AMSD system, the absolute position is available immediately after a reference run once the system is powered on.
Does the exact absolute position need to be reset when replacing components in the AMSD system?
When replacing read heads, slight deviations of up to a few tenths of a millimeter may occur. If more precise values are needed, adjustments to the control parameters should be made.
How does the output frequency relate to the travel speed in the AMSD system?
The AMSD system outputs the configured maximum frequency even when stationary. The control receiver must always be capable of receiving this maximum frequency.
Does the read head need to be aligned when installing the AMSD system?
Precise alignment of the read head is not necessary. It is sufficient to securely fasten it with the screws provided.
How does the signal period of 200 µm affect the measurement accuracy of the AMSD system?
The periodic deviation is less than 0.8 µm, ensuring high precision.
Can external fields from motors and rotary tables affect the scale of the AMSD system?
The scale of the AMSD system is protected within the rail. External fields are shielded by the construction of the rail and surrounding components, so no interference occurs.
What should be considered when using linear motors in the AMSD system?
It is recommended to mount the scale on the side opposite the linear motor to prevent magnetic fluxes from chips or tools from affecting the scale.
What are the installation requirements for the AMSD system?
Magnetic lifting tools should not be used when installing AMSD rails to avoid residual magnetism in the rail.
What accessories are compatible with the AMSD system?
All components from the MONORAIL MR and MONORAIL BM series are compatible with the AMSD system. However, it should be noted that sheet metal wipers are not included in the standard program.
Is a calibration required after installing an AMSD system? //
Does the exact absolute position need to be reset when replacing components in the AMSD system? //
How does the output frequency relate to the travel speed in the AMSD system? //
Does the read head need to be aligned when installing the AMSD system? //
How does the signal period of 200 µm affect the measurement accuracy of the AMSD system? //
Can external fields from motors and rotary tables affect the scale of the AMSD system? //
What should be considered when using linear motors in the AMSD system? //
What are the installation requirements for the AMSD system? //
What accessories are compatible with the AMSD system? //
After installing an AMSD system, the absolute position is available immediately after a reference run once the system is powered on.
Does the exact absolute position need to be reset when replacing components in the AMSD system? //
When replacing read heads, slight deviations of up to a few tenths of a millimeter may occur. If more precise values are needed, adjustments to the control parameters should be made.
How does the output frequency relate to the travel speed in the AMSD system? //
The AMSD system outputs the configured maximum frequency even when stationary. The control receiver must always be capable of receiving this maximum frequency.
Does the read head need to be aligned when installing the AMSD system? //
Precise alignment of the read head is not necessary. It is sufficient to securely fasten it with the screws provided.
How does the signal period of 200 µm affect the measurement accuracy of the AMSD system? //
The periodic deviation is less than 0.8 µm, ensuring high precision.
Can external fields from motors and rotary tables affect the scale of the AMSD system? //
The scale of the AMSD system is protected within the rail. External fields are shielded by the construction of the rail and surrounding components, so no interference occurs.
What should be considered when using linear motors in the AMSD system? //
It is recommended to mount the scale on the side opposite the linear motor to prevent magnetic fluxes from chips or tools from affecting the scale.
What are the installation requirements for the AMSD system? //
Magnetic lifting tools should not be used when installing AMSD rails to avoid residual magnetism in the rail.
What accessories are compatible with the AMSD system? //
All components from the MONORAIL MR and MONORAIL BM series are compatible with the AMSD system. However, it should be noted that sheet metal wipers are not included in the standard program.
集成的数字和模拟测距系统（带有滚柱或滚珠）
数字和模拟测量系统可实现精确的线性运动，并保持最严格的公差。
 |  |  | | | |  |  |  | |
|---|---|---|---|---|---|---|---|---|---|
| 系列AMSA 3B | 系列 AMSD 3B | 系列AMSA 4B | 系列 AMSD 4B | 系列 AMSABS 3B | 系列 AMSABS 4B | 系列AMSA 3L | 系列 MINISCALE PLUS | 系列 MINISLIDE MSQscale | |
| 更 | 更 | 更 | 更 | 更 | 更 | 更 | 更 | ||
| 磁栅 |  | | | | | | | ||
| 光栅 | | | |||||||
| 可与MONORAILMR一起使用 | | | | | |||||
| 可与MONORAIL BM一起使用 | | | | ||||||
| 可与MINIRAIL一起使用 | | ||||||||
| 增量测量方法 | | | | | | | | ||
| 绝对测量法 | | | |||||||
| 可与MSQ一起使用 | |
- 说明
- 100 % 最佳选择
75%
50%
25 % 明智选择
0%
Product overview AMSD 4B carriages
Technical data and options
Dimensions and capacities
Links to the following sizes:
AMSD 4B 15 digital with balls
AMSD 4B 20 digital with balls
AMSD 4B 25 digital with balls
AMSD 4B 30 digital with balls
AMSD 4B 35 digital with balls
AMSD 4B 45 digital with balls
Product overview AMSD 4B carriages
Product overview AMSD 4B rails
Technical data and options
Dimensions and capacities
Links to the following sizes:
AMSD 4B 15 digital with balls
AMSD 4B 20 digital with balls
AMSD 4B 25 digital with balls
AMSD 4B 30 digital with balls
AMSD 4B 35 digital with balls
AMSD 4B 45 digital with balls
Product overview AMSD 4B rails
AMS 电影
客户要求：
节省空间且快速装配的测距系统，接近加工过程。
我们的解决方案：
集成的测距系统 - 高精度，可靠且维护工作量低。
SCHNEEBERGER overview MONORAIL and AMS
SCHNEEBERGER MONORAIL小车的装配说明
Assembly instructions for SCHNEEBERGER read heads
联系媒体代表
Integrated measuring system guarantees exact travel distances
For over ten years, Schneeberger has been developing compact, integrated distance measuring systems for its monorail guideways and today, sets the standard in terms of accuracy, design, installation, adjustment, operation and maintenance.现在下载
Integrated measuring system for distance measurement
Schneeberger offers cost-optimised solutions in the form of its Integrated measuring system for distance measurement, which can be used for a wide range of applications.现在下载
可供下载的 AMS 测量系统型 CAD 数据：
所选尺寸可配置，并以所有通用数据格式提供 请点击相应的尺寸组合开始下载。
要开始下载，请点击相应的尺寸组合。
点击以下链接，您将自动跳转到 CADENAS。打开 CAD 数据
优点
- 读数头外壳完全密封，使用结构牢固的交叉刮屑板
- 数字信号直接来自读数头，无需额外的放大器元件
- 传感器元件采用独立紧凑的外壳
- 最大输出频率和磁滞可按客户的需求设置
- 有特殊的基准PULS适用于FANUC 控制系统
产品特点
- 紧凑的读数头，传感器元件采用独立紧凑的外壳
- 读数头可侧向安装
- 模拟接口
- 精度等级+ / - 5µm/ 1000mm，+ / - 2µm/ 40mm
- 信号周期偏差+ / - 1.0µm
- 可选用的不同分辨率 0,2 µm - 5,0 µm
- 允许的最大速度3,0m
- 最大加速度30g
综合测量系统客户热线
SCHNEEBERGER 推出了一系列广泛的服务，如维修、维护和技术支持等。
● 语言：德语和英语
● 欧洲
● 周一至周五：08:00-12:00 / 13:00-16:00 UTC +1, UTC +2 （三月至十月）服务
SCHNEEBERGER GmbH
Höfen, Germany
热线电话 +49 (0)7081 782 272
传真 +49 (0)7081 782 124
